Fluke 773. Process Clamp Meter

Fluke 773 process mA clamp meter

Ahorre tiempo SIN interrumpir el circuito en las mediciones de las señales de 4 a 20 mA. Si pierde tiempo:

• Removing cables and interrupting circuits to take mA measurements.
• Calling the control centre to isolate circuits.
• Checking analog inputs and outputs on a console.
• Troubleshooting devices with mA input and output.
• Repairing intermittent or erratic 4 to 20 mA circuits.
• Returning to the store for more instruments.

Si necesita más tiempo en su ajetreado día preste atención a las pinzas amperimétricas para medir miliamperios Fluke 773. Están diseñadas para ahorrarle tiempo y dinero eliminando las actividades que consumen tiempo. Ahora, puede solucionar y reparar los circuitos de 4 a 20 mA sin interrumpirlos ni parar el sistema. A continuación encontrará algunas maneras específicas en las que las pinzas amperimétricas Fluke 773 le ayudarán:

Features of milliamps clamp meters

Measurement of PLC mA signals and analog input/output signals of control systems without interrupting circuits.

• Measures low-range DC currents.
• Relates process indication to actual physical values.

Measurement of transmitter output signals without interrupting the circuit.

• Maintains and troubleshoots process and automation equipment without opening circuits.
• Does not interrupt processes.

Detachable clamp with extension cable.

• Measurements in hard-to-reach areas.
• Allows measurements in challenging situations.

Measurement spotlight.

• Illuminates hard-to-see cables in poorly lit areas.
• Makes the measurement process easier and faster.

Non-contact measurement up to a 99,9 mA range.

• Wide measurement range.
• Measures signals from 10 to 50 mA in older control systems.

Auto power off.

• Automatic switch-off of the light and backlighting after 15 minutes and 2 minutes respectively.
• Increases battery life.

Main features:

The Fluke 773 mA clamp meter includes:

• Best-in-class accuracy: 0,2 %.
• Resolution and sensitivity of 0,01 mA.
• Medición de señales 4 a 20 mA sin «interrumpir el circuito».
• Measurement of mA signals for analogue I/O of the control system and PLC.
• Dual display with backlighting, showing mA measurement and percentage of the range from 4 to 20 mA.
• Light to illuminate cables in poorly lit areas.
• Detachable clamp with extension cable for measurements in narrow spaces.
• Measurement of signals from 10 to 50 mA in older control systems using the 99,9 mA range.
• Automatic switching of output from 4 to 20 mA for remote testing.
• Energy-saving features, automatic shutdown, backlight off to extend battery life.
• Hold function captures and displays continuously changing measurements.
• Measurement of signals from 4 to 20 mA with internal circuit measurement.
• Simultaneous mA measurement in the circuit with loop power of 24 V for transmitter connection and testing.
• Generation of signals from 4 to 20 mA for I/O or I/P testing of control systems.
• Ramp or increment mA output of 25 %.
• Automatic switching of output from 4 to 20 mA for remote testing.
• DC voltage measurement to verify power supplies of 24 V or analog I/O voltage signals.
• DC voltage generation for testing input devices accepting signals from 1 to 5 volts or from 0 to 10 volts.
• Graduated mA output provides a continuous mA signal corresponding to the 4 to 20 mA signal measured with the clamp meter (mA).
• Allows recording of milliamps signals on an independent recording device without interrupting the loop.
• The mA output signal enables a digital multimeter with data logging or any other device to record the 4 to 20 mA signal without interrupting the circuit.
• mA output/input: simultaneous measurement of the mA signal with the clamp and generation of an mA signal.
• Application of an mA input signal to a device and measurement of the 4-20 mA output on devices such as valves or mA isolators.
• Output voltage ramp or linear increment of a 25 %.
• Automatic switching of output voltage for remote testing.
• Fluke 773 process clamp meter.