Fluke 772. Clamp meter

Fluke 772 milliamp measurement

• Measurement of mA signals from a PLC and the analogue input/output signal of the control system without interrupting the circuits.
• Measures low-range DC currents.
• Relates process indication to actual physical values.
• Measurement of transmitter output signals without interrupting the circuit.
• Maintains and troubleshoots process and automation equipment without opening circuits.
• Does not interrupt processes.
• Detachable clamp with extension cable.
• Measurements in hard-to-reach areas.
• Allows measurements in challenging situations.
• Measurement light.
• Illuminates hard-to-see cables in poorly lit areas.
• Makes the measurement process easier and faster.
• Measurement up to a range of 99,9 mA without contact.
• Wide measurement range.
• Measures signals from 10 to 50 mA in older control systems.
• Automatic shutdown.
• Automatic switch-off of the light and backlighting after 15 minutes and 2 minutes respectively.
• Increases battery life.

Main features:

• Best accuracy in its class: 0,2%.
• Resolution and sensitivity of 0,01 mA.
• Medición de señales 4 a 20 mA sin «interrumpir el circuito».
• Measurement of mA signals for analogue I/O of the control system and PLC.
• Dual display with backlighting, showing mA measurement and percentage of the range from 4 to 20 mA.
• Light to illuminate cables in poorly lit areas.
• Detachable clamp with extension cable for measurements in narrow spaces.
• Measurement of signals from 10 to 50 mA in older control systems using the 99,9 mA range.
• Automatic switching of output from 4 to 20 mA for remote testing.
• Energy-saving features, automatic shutdown, backlight off to extend battery life.
• Hold function captures and displays continuously changing measurements.
• Measurement of signals from 4 to 20 mA with internal circuit measurement.
• Simultaneous mA measurement in the circuit with loop power of 24 V for transmitter connection and testing.
• Generation of signals from 4 to 20 mA for I/O or I/P testing of control systems.
• Ramp or increment mA output of 25 %.
• Automatic switching of output from 4 to 20 mA for remote testing.