Fluke 1673 SCH FTT

Name: Fluke 1673 SCH FTT - Electrónica Edimar
SKU: FLK 1673 SCHFTT
Price: 2297.00 EUR
Availability: OutOfStock

Out of stockOut of stock

Fluke 1673 multifunction installation tester + Fluke TrueTest Advanced Software

Main features

Simple bidirectional user interface without complex multi-level menus
Easy configuration via full-colour touchscreen, smart device or PC
Fast and accurate testing thanks to automatic checking and automatic measurement validation
On-site preview of results and certificate generation with Fluke TruTest™️
No complicated data entry thanks to Fluke Connect compatibility

Specification	Features
Size	26,25 cm x 14,19 cm x 11,93 cm (10,3” x 5,6” x 4,7”)
Weight (including batteries)	1,6 kg
Battery size and number	BP290, lithium-ion, 10,8 V, 2500 mAh, 27 Wh
Water resistance	IEC 60529: IP40
Safety	Complies with IEC/EN 61010-1, IEC 61010-2-030, IEC 61010-2-034 standards
Safety category	CAT III 600 V, CAT IV 300 V
Performance	IEC 61557-1 to IEC/EN 61557-8 and IEC 61557-10

AC, DC voltage and frequency measurement

Range	Resolution	Input impedance	Overload protection
600 V	0,1 V	320 kΩ	660 V
45 – 66 Hz	0,1 Hz	320 kΩ	–

Continuity check (R_LO)

Range (auto range)	Resolution	Open circuit voltage
20 Ω / 200 Ω / 2000 Ω	0,01 Ω / 0,1 Ω / 1 Ω	>4 V

Insulation resistance measurement (R_ISO)

Test voltages
1672		100-250-500-1000 V
1673 FC / 1674 FC		50-100-250-500-1000 V
Test voltage	Insulation resistance range	Resolution	Test current
50 V	10 kΩ to 50 MΩ	0,01 MΩ	1 mA to 50 kΩ
100 V	10 kΩ a 20 MΩ 20 MΩ a 100 MΩ	0,01 MΩ 0,1 MΩ	1 mA to 100 kΩ
250 V	10 kΩ a 20 MΩ 20 MΩ a 200 MΩ	0,01 MΩ 0,1 MΩ	1 mA to 250 kΩ
500 V	10 kΩ a 20 MΩ 20 MΩ a 200 MΩ 200 MΩ a 500 MΩ	0,01 MΩ 0,1 MΩ 1 MΩ	1 mA to 500 kΩ
1000 V	100 kΩ a 200 MΩ 200 MΩ a 1000 MΩ	0,1 MΩ 1 MΩ	1 mA to 1 MΩ

Insulation PreTest

Preliminary insulation safety check

Connections are required from the tester to L, N and PE.

Insulation PreTest; insulation ramp test of SPD (surge protective device) (varistor test) IEC 61643-11

Test voltage	Voltage ranges	Resolution	Test current	Accuracy
500 V	Ramp in increments from 0 V to 500 V	1 V	1 mA	± (1,5% + 3 digits)
1000 V	Ramp in increments from 0 V to 1000 V	1 V	1 mA	± (1,5% + 3 digits)

Insulation Monitoring Devices (IMD) IEC 61557-8

Range	Resolution	Note
1 kΩ to 10 kΩ	1 kΩ	>>1 MΩ only available with voltages >100 V
10 kΩ to 100 kΩ	10 kΩ
100 Ω to 3 MΩ	100 kΩ

Loop and line impedance (ZI without tripping and high current)

Range adjustment	Resolution	Accuracy[1]
10 Ω^[2]	0,001 Ω	High current mode in mΩ: ± (2% + 15 digits); no-trip mode (2 and 3 wires): ± (3% + 6 digits)
20 Ω	0,01 Ω	High current mode: ± (2% + 4 digits)
200 Ω	0,1 Ω	Modo sin disparo: ± (3%) Modo de alta corriente: ± (2%)
2000 Ω	1 Ω	± 6%^[3]

Valid for neutral circuit resistances <20 Ω and a system phase angle of 30° maximum. Before testing, the test lead resistances must be zeroed.
Fluke Connect™ 1674 FC model only.
Valid for mains voltage >200 V.

Predicted Earth Fault Current (PEFC) Predicted Short-Circuit Current (PSC)

Range	Resolution	Units
0 kA to 50 kA	I_K <1000 A I_K ≥1000 A	1 A 0,1 kA

Calculation: The predicted earth fault current (PEFC/I_K) or the predicted short-circuit current (PSC/I_K) are determined by dividing the measured mains voltage by the measured loop (L-PE) or line (L-N) resistance, respectively. Voltage drop (via line impedance test)

Range	Resolution	Accuracy
0,0-99,9%	0,1%	Tenga en cuenta la exactitud de las medidas de impedancia de línea

Note: The voltage drop reading is calculated from the line impedance measurement and the entered rated current. RCD tests, types of RCD tested

RCD type^[1]		1672	1673 FC	1674 FC
AC^[2]	G^[3]	•	•	•
AC	S^[4]	•	•	•
A^[5], F^[6]	G	•	•	•
A, F	S	•	•	•
B, B+^[7]	G		•	•
B, B+	S		•	•
RCD-DD, RCD A/EV, RCD B/Mi^[8]			•	•
GFCI		•	•	•

Inhibited RCD test for V >265 AC
RCD tests only permitted if the product of the selected current and earth resistance is <50 V
AC: Responds to AC
G: General, no delay
S: Time delay
A: Responds to AC and pulsed signal
F: Responds to AC, pulsed signal and high frequency
B, B+: Responds to AC, pulsed signal, high frequency and smooth DC
RCD-DD: Responds to residual currents of 6 mA DC

RCD trip time check (ΔT)

Test function	RCD current selection
Test function	10 mA	30 mA	100 mA^[1]	300 mA^[1]	500 mA^[1]	1000 mA^[2]	Var^[3]
x½, 1	•	•	•	•	•	•	•
x⁵	•	•	•
Ramp	•	•	•	•	•	•	•
Automatic	•	•	•

Mains voltage 50 V – 265 V AC, 45/66 Hz

Type B residual current devices require a mains voltage range from 195 V to 265 V.
Residual current devices of type CA only.
Type A residual current devices are limited to 700 mA; not available for type B devices.

Measurement/_{ramp test} of RCD trip current (IΔN)

Current range	Step size	Dwell time		Measurement accuracy
		Type G	Type S
From 30% to 110% of the RCD rated current^[1]	10% of I_ΔN^[2]	300 ms/step	500 ms/step	±5%

1. Specific trip current ranges (IEC 61008-1):

De 30% a 150% para Tipo A IΔ N>10 mA De 30% a 210% para Tipo A IΔ N = 10 mA De 20% a 210% para Tipo B De 50% a 100% para Tipo CA De 35% a 140% para Tipo A (>10 mA) De 35% a 200% para Tipo A (£ 10 mA) De 50% a 200% para Tipo B2. 5% para Tipo B

Earth resistance test (RE) at 1673 FC and 1674 FC only