Fluke 1760

Main features: Fluke three-phase electrical quality analysers

Class A compliance: Perform tests according to the strict international IEC 61000-4-30 Class A standard.
GPS synchronization: Accurately relates recorded data and events with a standardised time reference.
Flexible and fully configurable thresholds and scaling factors: Allows the user to analyse specific problems by defining detailed criteria for disturbance detection and recording.

Check the lead time with Edimar.

Available on backorder

21.489,00 € excluding VAT - 26.001,69 € including VAT

Available on backorder

✓ This product supports 3% welcome discount. Conditions

EAN: 0095969346108 SKU 2630744 Categories Electrical Testers, Electronic Instrumentation Brand: Fluke

MPN: 2630744

Share this product:

Description

Statistical evaluation: Electrical quality statistics according to EN50160 and DISDIP tables such as ITIC, CEBEMA, ANSI.
Event list: Fluctuations and interruptions are detected and stored in the event list.
Continuous recording: RMS values with minimum and maximum values for voltage, current, power P, Q, S, power factor, kWh, voltage flicker, imbalances, frequency and harmonics.
Triggered recordings: Effective values with adjustable intervals between 10 ms (1/2 cycle) and 3 seconds.
Online mode: Allows checking the instrument configuration and provides a quick summary of events.

Feature	Description
Intrinsic uncertainty	2 year warranty under reference conditions.
Environmental conditions	Operating temperature range: 0 °C to +50 °C.
Maximum service altitude.	Maximum 2.000 m with 600 V CAT IV.
Power supply	AC: from 83 V to 264 V, DC: from 100 V to 375 V.
Power consumption	NiMH, 7,2 V, 2,7 Ah with 40 minutes autonomy in case of power failure.
Data memory	2 GB Flash memory.
Interfaces	Ethernet (100 MB/s), RS 232 with external modem.
Dimensions (H x W x D)	325 x 300 x 65 mm.
Weight	Approx. 4,9 kg (without accessories).

Feature	Description
Sampling frequency	10,24 kHz for supply frequency of 50 Hz.
Uncertainty for frequency measurement	Less than 20 ppm.
Transients	Sampling rate from 100 kHz to 10 MHz per channel.
Harmonics	According to IEC standard 61000-4-7:2002.

Feature	Description
Number of inputs	8 inputs with galvanic isolation for voltage and current measurements.
Nominal voltage	100 mV (rms).
Overload capacity	1.000 V (rms) continuously.
Voltage rise rate	Maximum 15 kV/µs.
Input resistance	1 MΩ.