Fluke 2052

Main features

Quickly and accurately locate live and dead wires in walls, ceilings and floors.
Locate breaks, open circuits and short circuits and easily identify switches and fuses.
Safety category CAT IV 600 V.
Includes the AC clamp meter i400, which allows inducing a locating signal on the cable when access to bare conductors is not possible.

Check the lead time with Edimar.

Available on backorder

1.275,00 € excluding VAT - 1.542,75 € including VAT

Available on backorder

✓ This product supports 3% welcome discount. Conditions

EAN: 00195112044568 SKU 5353853 Categories Electronic Instrumentation, Cable locator Brand: Fluke

MPN: 5353853

Share this product:

Description

Specifications: Fluke 2052 advanced cable locator kit

General

	Receiver 2052R	Transmitter 2000T	AC clamp meter i400
Safety category	CAT IV 600 V	CAT IV 600 V	CAT IV 600 V, CAT III 1000 V
Operating voltage	600 V CA/CC	600 V CA/CC	1000 V CA
Operating frequency	With voltage: 6,25 kHz Without voltage: 32,768 kHz	With voltage/loop: 6,25 kHz Without voltage: 32,768 kHz	N/A
Signal indications	Numeric display, bar graph and audible beep	LED and audible beep	N/A
Response time	Tip sensor (with/without voltage): 500 ms NCV: 500 ms Battery monitoring: 5 s	Line voltage monitoring: 1 s Battery voltage monitoring: 5 s	N/A
Output signal current (typical)	N/A	Circuit with voltage: High mode: 60 mA rms Low mode: 30 mA rms Circuit without voltage: High mode: 110 mA rms Low mode: 40 mA rms Loop mode with test leads: 160 mA rms Loop mode with AC clamp meter i400: 385 mA rms	N/A
Output signal voltage (nominal)	N/A	Circuit with voltage: High mode: 14 W at 230 V CA/50 Hz, 3,33 kΩ at 230 VAC Low mode: 4,6 W at 230 V CA/50 Hz, 11,5 kΩ at 230 VAC Circuit without voltage: High mode: 31 V RMS, 140 Vp-p, 0,86 W at 1 kΩ load Low mode: 27,5 V RMS, 120 Vp-p, 0,1 W at 1 kΩ load Loop mode with test leads: 32 V RMS, 140 Vp-p, 0,87 W at 1 kΩ load Loop mode with AC clamp meter i400: 31 mV, 0,89 W at 1 Ω load	N/A
Detection distance (open air)	Tip sensor: With voltage Maximum open air distance: up to 6,1 m (20 feet) Localización exacta: aprox. 5 cm (1,97″) Tip sensor: Without voltage Maximum open air distance: up to 4,5 m (14,7 feet) Localización exacta: aprox. 5 cm (1,97″) NCV (40 Hz to 400 Hz): Maximum sensitivity: 90 V up to 2 m Minimum sensitivity: 600 V up to 1 cm	N/A	N/A
Current range	N/A	N/A	400 A
Basic accuracy	N/A	N/A	2% + 0,06 A (45 Hz to 400 Hz)

Mechanical and general specifications

Size:
- Receptor 2052R: Aprox. 183 x 75 x 43 mm (7,2 x 2,95 x 1,69″)
- Transmisor 2000T: Aprox. 183 x 93 x 50 mm (7,2 x 3,66 x 1,97″)
- Pinza amperimétrica de CA i400: Aprox. 150 x 70 x 30 mm (5,9 x 2,75 x 1,18″)
Weight:
- Receiver 2052R: Approx. 0,27 kg (0,6 lb)
- Transmitter 2000T: Approx. 0,57 kg (1,25 lb)
- AC clamp meter i400: Approx. 0,114 kg (0,25 lb)
Protection: IP 40
Operating temperature: −20 °C to 50 °C (−4 °F to 122 °F)
Operating altitude: 2000 m (6561 feet)
Power supply:
- Receiver 2052R: 4 AA batteries (alkaline)
- Transmitter 2000T: 8 AA batteries (alkaline)
Battery life:
- Receiver 2052R: Approx. 16 h
- Transmitter 2000T: High/low mode: approx. 25 h, Loop mode: approx. 18 h

Accessory and test cable kit 2000ACC

Includes:
- 2 test cables of 1 m (red, black)
- 1 test cable of 7 m (green)
- 2 test probes (black)
- 2 crocodile clips (red and black)
- 2 flat socket adapters (red, black)
- 2 round socket adapters (red, black)
Safety category: CAT IV 600 V (test cables), CAT II 1000 V (test probes), CAT IV 600 V (crocodile clips), CAT II 300 V (socket adapters)
Operating voltage and current: 600 V, 10 A max. (red and black cables), 600 V, 10 A max. (green cable), 1000 V, 8 A max. (test probe)
Water and dust protection: IP 20
Drop resistance: 1 m (3,28 feet)

Downloads